GRÜNDORF Holzwerkstoffe GmbH & Co. / www.gruendorf.de

Verlauf: gruendorf/english / Product worlds / pure nature click/Technical Details

<< Navigationsbaum english

<< Startseite

Finally a solid wood floor is available that is suitable for renovations!

Thanks to its 12 mm thickness, pure nature click helps to prevent problems where the height of the floor is a concern. The Click`nFix connection makes installation of the planks very easy. Combined with the innovative Elastilon mat, the installation results are perfect and the floor is immediately ready for use. Pure nature click floors can also be fully glued to the sub-floor and are ideally suited for economical use with warm water underfloor heating systems.


	Practical installation that works every time

	GRÜNDORF pure nature click is equipped with Click`n Fix glue-free installation technology. Floors are installed square and parallel because the planks align themselves automatically. The floor is immediately ready for use after installation on the Elastilon mat and is very easy to install.


Installation on the Elastilon mat

The vapour barrier is laid out as moisture protection along the direction of installation.

The Elastilon mat is laid out at right angles to the direction of installation.

Elastilon is laid over the whole installation area and the protective film for the first two rows is folded back.

The first two rows of the floor are laid out and fixed with wedge spacers with an appropriate expansion gap.

The protective film is pulled off under the planks and the planks are glued to the Elastilon surface.

Afterwards the rest of installation is carried out row by row, as described previously.

Advantages of Elastilon

Simple and quicker installation of solid wood planks
More comfort during installation thanks to the insulating underlay
Force-fit connection of the planks thanks to the self-adhesive surface
Reduced formation of open joints in dry seasons thanks to a nylon fabric that acts as a restraint
Outstanding footfall sound insulating values
Lower installation heights because laths are not required
No CFCs or volatile substances

	Dimensions:

	Length:	1.180 / 1.380 / 1.580 mm
	Panel width:	120 mm
	Thickness:	12 mm
	Thickness of the wear layer:	approx. 3 mm